Software for LayerZero

Navigation

Project Overview
Why will there be a token and likely an airdrop?
Airdrop criteria
Cost of software
How much balance do I need to have on my wallet?
Download the software
Features
Transfer Gas Estimator
FAQ

✅ Project Overview

LayerZero is a protocol that allow users to interact with dApps on other blockchains. These decentralized applications will seamlessly exchange data through LayerZero, even if the user doesn't realize it.

💰Investors: LayerZero has raised $293M from a16z, Coinbase, Binance, Sequoia Capital, Tiger Global, Uniswap, PayPal Ventures, Samsung NEXT, Circle Ventures, OKX Exchange. 🔥

Why will there be a token and likely an airdrop? 🪂

If we look at a section of the project code, we can see that the token $ZRO is confirmed ✅, which means that an airdrop is likely. 👀

✅ Airdrop criteria

The most likely airdrop criteria in our opinion:

XX transactions in LayerZero.
X months of activity (Be a regular user).
X transaction volume via bridges.
X blockchain interactions.
Have staked STG.
Vote in the Stargate project on Snapshot (There is a separate automation software)👇

Software for Snapshot voting and preparing voting accounts

SOFTWARE

💰 Cost of software

The cost of 1 account - from $2.5

(for unlimited transactions)

When depositing from $1000, receive a bonus of up to +100%.

Cost of accounts with bonuses:

Deposit Amount	Price of account
Under $1,000	$5
$1000	$4.54
$2000	$4.16
$3000	$3.84
$4000	$3.57
$5000	$3.33
$6000	$3.12
$7000	$2.94
$8000	$2.77
$9000	$2.63
$10000	$2.5

💡

Guide on how to pay your account 👇

A guide to adding wallets and paying for software in DegenSOFT.

Download the software

You can download only from Dropbox.

❗️Software is not given away in any bots (even in our bots, in case the bot is hacked).

⭐️ How much balance do I need to have on my wallet?

To run all bridges it is enough to have 30 USDC (100+ USDC is better). and on commission in native tokens (10$ each) in each network you want to run (MATIC, AVAX, ETH).

💡

Guide on automatic replenishment of wallets with our software 👇

Multisender - software for withdrawal from exchanges and wallets

❗️ Balances should be distributed to wallets only from centralized exchanges, so that accounts are not detected as multi-accounts. It is also desirable to randomize the withdrawal amount.

📥 It is most convenient to withdraw from Okex.

Withdrawal fee: MATIC: 0.48 Matic (0.4$). AVAX: 0.0064 AVAX (0.09$).

📥 Or withdraw from Bitget.

Withdrawal fee: MATIC: 0.1 Matic ($0.07$) AVAX: 0.0064 AVAX ($0.09)

Features

Main functionality of the software

Software bridges via Stargate and Bitcoin Bridge on the networks: Arbitrum, Optimism, Base, Linea, Avalanche, Polygon, Ethereum, Fantom, Binance Smart Chain.
Gas Refuel via Merkly on the networks: Arbitrum, Avalanche, Binance Smart Chain, Celo, Core, Ethereum, Fantom, Gnosis, Moonbeam, Moonriver, Nova, Optimism, Polygon, Polygon zkEVM, zkSync.
Sending messages via zkMessenger from Polygon/BSC on Polygon, BSC, Nova, Fantom.

Additional features

Ability to select a gas limit above which the software will not work.
Ability to use mobile proxies for zkMessenger only.
Ability to select a gas limit above which the software will not work.
Ability to use encrypted private keys.

💡

Guide to encrypting private keys 👇

Encrypter - software for encrypting wallets

Manual RPC change, in case of errors on the side of the originally set RPC.
Creating and selecting configurations with loops.
Randomization of the order of projects.
Randomization of the amount.
Randomization of the order of wallets.
Transfer of native tokens along with bridge.
Transferring the entire token balance.
For each action, you can select any amount of token purchase in the range, specified in USD. The amount will be selected randomly.
Attempting to make a transaction through another bridge route if the previous transaction was not executed for any of the reasons.

💡

EXAMPLE: Specified networks for exchange - Arbitrum, Optimism. Possible bridge variants: Optimism-Arbitrum Arbitrum-Optimism

If the first randomly chosen bridge fails the transaction, then another bridge will be attempted.

If all variants are tried and no correct one is found, the program will move on to the next wallet.

WARNING! Due to network limitations, certain tokens cannot be sent for some routes:

The Polygon network does not support the ETH token. The Fantom network does not support USDT token. The Fantom network does not support ETH token. The Avalanche network does not support the ETH token.

Do I need to have native blockchain tokens in advance?

Not necessary, because there is a function to transfer native tokens together with the bridge in the selected range.

But it is noticed that there are additional commissions for swap (1-3$), it turns out cheaper to have native tokens from exchanges beforehand 👌.

Which tokens support which networks 👇

It is best to use USDC and STG because they are available on all networks.

▶️ Stargate Bridge

💡

This module allows you to bridge tokens available in the software via Stargate.

In the field min ($) and max ($) select the amounts for bridge.
Select the necessary token for bridge and balance. You can choose to transfer the whole balance or a part of it.

💡

To transfer the entire balance, you must make sure to enable the "Swap the entire remaining balance" checkbox and set values for min ($) and max ($) that are GREATER than your balance.

Select the desired networks for the transfer. You can select specific networks and random networks by checking the checkboxes of all networks of interest.
If you need to send a native token to the receiving network, enable the corresponding checkbox next to the desired network and select the amount of native token to receive.

▶️ Bitcoin Bridge

💡

The BTC.b token bridge is implemented using the Bitcoin Bridge in available networks.

It is also possible to transfer the entire available balance, as well as a portion of the tokens to be selected within the range.

▶️ Merkly

💡

This module allows you to make Gas Refuel between selected networks via Merkly.

In the min ($) and max ($) fields, select amounts for receiving a native token in the destination network.
Select the desired networks.

💡

IMPORTANT! If you select several networks at the same time, the software will create only one bridge on a random route from the selected ones. Additionally, if any of the networks do not have enough balance for the bridge, the software will attempt another route until it achieves a successful transaction 🔥. If none of the routes are successful, the software will move on to the next wallet.

Cheapest networks and routes for Merkly 🔥

The cheapest networks: Celo, Core, Fantom, Gnosis, Moonbeam, Moonriver, Nova, Polygon.

Examples of cheap routes:

Nova→Moonbeam - $0.1.
Polygon→Moonbeam - $0.1.
Polygon→Moonriver - $0.1.
Polygon→Celo - $0.05 🔥.
Fantom→Celo - $0.09 🔥.
Fantom→Moonbeam - $0.09 🔥
Optimism→Nova - $0.2.
Polygon→Nova - $0.13.
Gnosis→Celo - $0.05 🔥.
Gnosis→Moonbeam - $0.07 🔥.
Moonbeam→Nova - $0.14.
Moonbeam→Celo - $0.08 🔥.

▶️ zkMessenger

💡

This module allows you to send messages via zkMessenger to your wallet address.

This block allows you to be active in two projects at once thereby qualifying for a possible airdrop from Polyhedra for using their functionality, as well as LayerZero since sending messages goes via LayerZero. 🔥

❗

IMPORTANT! It is possible to use mobile proxies to send messages via zkMessenger, as there is a possibility that Polyhedra may track users' IP addresses.

You can specify the proxy on the settings page in the format http://login:pass@ip:port

▶️ Cost of sending messages with 30 GWEI:

Polygon → BSC - $1.25.
Polygon → Nova - $0.08 🔥.
Polygon → Fantom - $1.4.
BSC → Polygon - $1.1.
BSC → Nova - $0.4 🔥.
BSC → Fantom - $1.7.

Network randomization

This function works as follows:

If you specify 1 network in the "from" column, the sending network will not be randomized and will always send from it. It is the same for the "to" column.
If you specify >1 networks in the "from" column, the sending network will be randomized among the selected networks. It is the same for the "to" column.

Transferring the entire remaining balance

If you check this checkbox, the bridge of the entire token balance will be made if the selected amount will be more than the balance and at the same time more than the specified minimum balance.

Native token swap

This function is implemented for networks: Avalanche, Polygon, Fantom, and BSC.

When this function is activated during the bridge To THIS network, native token will be purchased and transferred to that network.

WARNING! Native token exchange is made for the token in which the fee is paid:

If the transaction is made from a network:

Arbitrum, there will be an exchange of ETH token to the receiving network.

Optimism, there will be an exchange of ETH to the receiving network's native token.

Ethereum, there will be an exchange of ETH for a receipt network native token.

Avalanche, there will be an exchange of AVAX for a Receive Network native token.

Polygon, there will be an exchange of MATIC to a Receive Network token.

BSC, then there will be an exchange of BNB for the receiving network's native token.

Creating and using configurations

In the configuration we can save the required parameters of the software for further work. We can create several configurations, load them into the software and run them at the same time for work.

To create the configuration, set all necessary parameters of the software and click Save current configuration. The configuration will be saved to the software folder as a JSON file.
To use the configuration click Load configuration and select the created configuration file. Be sure to check Use selected configuration.

Additionally, you can select the pause range if there are multiple configurations, and the number of repetitions for a configuration.

🔥 Ready-made configurations

In the software folder you can find already ready configurations for work.

It is enough just to load them into the software and start working. 🚀

💡

Configuration of BTC.b-ARB_OP_AVAX_MATIC_BSC BTC.b token bridge via Bitcoin Bridge between Arbitrum, Optimism, Avalanche, Polygon and Binance Smart Chain networks. Bridge amount - transfer of the entire balance from 10$ and more. Delay between wallets - from 115 sec to 160 sec,
Configuration STG-ARB_OP_BASE_AVAX_MATIC_FTM_BSC_LINEA STG token bridge via Stargate between Arbitrum, Optimism, Base, Avalanche, Polygon, Fantom, Linea and Binance Smart Chain networks. Bridge amount - transfer of the entire balance from 10$ and more. Delay between wallets - from 115 sec to 160 sec.
Configuration USDC-ARB_OP_BASE_AVAX_MATIC_FTM Bridge USDC token via Stargate between Arbitrum, Optimism, Base, Avalanche, Polygon and Fantom networks. Bridge amount - transfer of the entire balance from 10$ and more. Delay between wallets - from 115 sec to 160 sec.
Configuration WOO-ARB_OP_AVAX_MATIC_FTM WOO token bridge via Stargate between Arbitrum, Optimism, Avalanche, Polygon and Fantom networks. Bridge amount - transfer of the entire balance from 10$ and more. Delay between wallets - from 115 sec to 160 sec.
Configuration ETH_ARB_OP_BASE_LINEA_USD_10-15 ETH token bridge via Stargate between Arbitrum, Optimism, Base and Linea networks. Bridge amount - from $10 to $15 in ETH tokens. Delay between wallets - from 115 sec to 160 sec.
Configuration ETH_ARB_OP_BASE_LINEA_USD_15-20 ETH token bridge via Stargate between Arbitrum, Optimism, Base and Linea networks. Bridge amount - from $15 to $20 in ETH tokens. Delay between wallets - from 115 sec to 160 sec.
Configuration ETH_ARB_OP_BASE_LINEA_USD_20-25 ETH token bridge via Stargate between Arbitrum, Optimism, Base and Linea networks. Bridge amount - from $20 to $25 in ETH tokens. Delay between wallets - from 115 sec to 160 sec.

Manual RPC change

The ability to change RPCs is implemented for when there are difficulties on the side of any of the RPCs.

Instructions for changing the RPC

To change the RPC, you must change the data in the config file.

Open the config file with any text editor (e.g. Notepad).
In the config file, go a little lower to the section with the RPC addresses for the networks.

After that, we need to change the RPC for the network with which the error occurred.
New data for RPC is available on Chainlist: https://chainlist.org/.
Find the network we need, click on the drop-down list button and select any of the RPCs presented.

Copy the RPC and paste it into the config file instead of the one specified there. Be sure to save the changes.

Transfer Gas Estimator

Different blockchains have different bridge and network commissions. Up-to-date data can be found at https://stargate.finance/transfer.

By clicking here 👇

Instructions for launching the software.

1) Download the software only from from Dropbox.

The program only works on windows and on startup you may see a window warning that it is not safe to use because the developer is unknown. Click open anyway.

2) The API key button will give you the key to enter into the program API key can be obtained from the bot https://t.me/DegenSoftBot.

3) Add private keys (not phrases) to the wallets.txt file and import it.

Important! - The first line must not be skipped! -Insert not the seed phrase, but the private key!

It should look like this:

FAQs.

❓ How can I check if the software worked successfully?

You can check which transactions went through https://debank.com/.

❓ The program runs everything from the same ip. Won't multi-accounts get shaved?

There is no interaction with the interface. The software makes transactions directly on the blockchain and the projects don't see our IP.

❓ Why closed source software?

The program is made primarily for yourself and private channel. The closed code is needed to prevent the program from going to other private and public channels.

❓ Do we see the private keys?

No, we don't see private keys. You download the program to your computer and your private data are not sent anywhere. Moreover, they are not even saved anywhere.

❓ Do we see the wallet addresses?

Wallet addresses we do not see, as YOU in DegenSOFT BOT add Hash your wallets, which you encrypt in advance and in the future when working, the software will refer to the Hash.