Navigation
- Project Overview
- What activities can you do?
- Why will there be a token and likely an airdrop?
- Airdrop criteria
- Cost of software
- How much balance do I need to have on my wallet?
- Download the software
- Features
- FAQ
✅ Project Overview
One of the largest and most popular projects without a token.
Project N2 by 🐦TwitterScore (667) stands among projects without a token.👌
Obviously, the project will be worth billions, maybe 10 billion, and if the drop is handed out, it will very likely be no less than Arbitrum. 👀
✅ What activities can you do?
- Token swap - https://portfolio.metamask.io/swap.
- Bridge transfer - https://portfolio.metamask.io/bridge.
Why will there be a token and likely an airdrop? 🪂
❗️ The MASK token recently appeared on Coinmarketcap.
👀 And also 🦊 MetaMask kindly reminded on Twitter that MetaMask Bridge supports Arbitrum, Polygon, Optimism, Avalanche, BSC, and Ethereum networks.
In a recent speech, ConsenSys CEO Joe Lubin mentioned plans to release a token. 👀
✅ Airdrop criteria
- XX swaps in Metamask.
- XX bridges in Metamask.
- Be a regular user for X months.
- Have X balance in the Ethereum network.
SOFTWARE
💰 Cost of software
The cost of 1 account - from $5
(for unlimited transactions)
When depositing from $1000, receive a bonus of up to +100%.
Cost of accounts with bonuses:
Deposit Amount | Price of account |
Under $1,000. | $10 |
$1000 | $9.1 |
$2000 | $8.3 |
$3000 | $7.7 |
$4000 | $7.1 |
$5000 | $6.6 |
$6000 | $6.2 |
$7000 | $5.8 |
$8000 | $5.5 |
$9000 | $5.2 |
$10000 | $5 |
⭐️How much balance do I need to have on my wallet?
You need to have 30 USDC and for commission in native tokens ($10) in each network you want to run (MATIC, AVAX, BNB, ETH) to run all bridges.
⭐️Download the software
You can download only from Dropbox.
Features
⭐️ Main software features
▶️ Bridges - bridge between random networks or via direct routes.
Networks: Ethereum, Arbitrum, Optimism, BNB, Avalanche, Polygon, zkSync, Base, Linea
Tokens: ETH, USDC, USDT
▶️ Swaps - swaps on Arbitrum, Optimism, Ethereum, BNB, Polygon, Avalanche, Linea. Each network swaps from a native blockchain token.
▶️ Reverse Swaps - reverse swaps in Arbitrum, Optimism, Ethereum, BNB, Polygon, Avalanche, Linea networks. The swap occurs to a native blockchain token.
▶️ Wallet Manager - displays the balance of all wallets loaded in the software and allows you to select specific wallets to work with from the list.
⭐️ Additional software features
- Ability to use encrypted wallets
- Ability to limit GWEI
- Ability to limit slippage on swaps
- Ability to use mobile proxies for zkSync Era
- Software auto-update when a new version is released
- Ability to select minimum remaining balance at swaps
- Ability to specify and change RPC
- Ability to use a range of amounts for reverse swaps (swap back not the whole selected token, but a part of the selected range)
- Randomization of tokens for swaps or bridging
- Sum randomization
- Randomization of delay between actions
- Shuffling of wallets
- Remaining token balance transfer
▶️ Bridges
It is possible to bridge between random networks or bridge by specified routes.
IMPORTANT! If the transaction is unsuccessful (insufficient balance on the wallet, any other error) when making a random bridge, the transaction will be attempted via another route
If more than one token is selected for bridge, one of them will be selected randomly.
Direct Bridges
In this block, you can select the routes you would like the wallets to take.
Each wallet will run the routes you choose without randomizing routes!
Selecting the amount for bridge
Amounts for bridge from each network are selected in this block.
It is possible to choose the amount both in USD and in % of balance.
▶️ Swaps
To swap, you need to check the box next to the token you want to swap to.
Swap amounts are selected in the Range of amounts for exchanges.
It is possible to choose the amount both in USD and in % of balance.
Ability to select the minimum remaining balance on the balance
This allows you to always leave a certain minimum amount of money on your balance, so that you will always have enough native token to pay the reverse swap fee.
Custom token swaps
This function allows you to exchange native tokens for any custom token available in Metamask.
To do this, you need to insert the token contract in a special field and specify the actual price of the token. The current price can be taken from Coinmarketcap.
How to find out the contract address of a token
- Go to Coinmarketcap.
- Search for the name of the token you need.
- On the token page, look for the "Contracts" column and copy the address for the desired network.
▶️ Reverse swaps
For reverse swap you need to check the box next to the token you want to swap.
You can also choose the number of tokens to swap and the minimum amount of tokens you want to swap.
Swap amounts are selected in the Range of amounts for exchanges.
It is possible to choose the amount both in USD and in % of balance.
Ability to use the range for reverse exchange
To exchange back into native token not all tokens, but only a part of them, we can use the range function.
To do this, set the necessary range in the USD amount block and click the checkbox next to the desired network.
▶️ Configurations
In the configuration you can save the required parameters of the software for further work. You can create several configurations, load them into the software and run them at the same time for work.
For example, you can create a configuration for working with bridges, then a configuration for swaps and a configuration for reverse swaps. All the created configurations can be loaded into the software and run at once. The software will execute all loaded configurations one by one.
▶️ Wallets
Wallet statistics collection is available using Ankr or Debank
- Ankr - supports only balances in Arbitrum, Polygon, Avalanche, BNB, Optimism, Base networks.
- Debank - supports all networks that are available in Debank.
Settings for collecting statistics
▶️ Settings
API key - specify key obtained from DegenSoftBot.
Encrypt wallets - upload a file with wallets, specify the password for encrypted wallets and check Encrypt keys.
GWEI - specify the maximum GWEI above which the software will not work and pause for 60sec waiting for better gas.
Slippage - specify the maximum slippage percentage.
Select Action - select which action you want to run.
Proxy for Debank and Ankr API Key - needed to collect wallet statistics.
Network providers - specify the RPC to work with. You can get it on the Chainlist website.
Mobile proxy for zkSync Era - Proxy for zkSync Era. Format: http://login:pass@ip:port
Change Proxy for zkSync Era - link to change IP.
Delay Boundaries - select delays between wallets and projects.
🚀Instructions for launching the software
- Pay for the software and add wallets according to the guide👇 A guide to adding wallets and paying for software in DegenSOFT.
- Download the software from Dropbox - link.
- Open DegenSOFT BOT and click on API key. Get the key to enter into the program.
- Unzip the archive with the software to a convenient path and run the software file.
- Import the file with private wallet keys.
- Set the startup parameters you need and choose the action in Settings of the software and run the software.
FAQ
❓ How do I check if the software worked successfully?
You can check which transactions went through https://debank.com/
❓ The program does everything from one IP. Won't multi-accounts be deleted?
There is no interaction with the interface. The software makes transactions directly on the blockchain and the projects do not see our IP.
❓ Why closed source software?
The program is made primarily for yourself and private channel. The closed code is needed to prevent the program from going to other privates and public channels.
❓ Can we see the private keys?
No, we do not see private keys. You download the program to your computer and your private data is not sent anywhere. Moreover, they are not even saved anywhere.
❓ Do we see wallet addresses?
We do not see the adresses of wallets, because YOU in DegenSOFT BOT add Hash of your wallets, and later when working, the software will refer to the Hash.