Software for Base

The software is implemented as part of the DegenSoft application. Details about DegenSoft 👇

ℹ️ Navigation

✅ Project Overview

Base - another L2 to get airdrop 👀

It's worth mentioning that Base is built as an MIT OP Stack in collaboration with Optimism. The Base team stated they specifically joined Core Dev working on the OP Stack to make it publicly available to everyone.

According to the developers, Base is the easiest way for decentralized applications to use the products and distribution of Coinbase, which has over 110 million users with over $80 billion in assets in the Coinbase ecosystem, thereby once again putting an emphasis on scalability.

Social Media

Discord - 338k

Twitter - 676k

TwitterScore - 498, no comments, amazing score for crypto project

🤔 Will there be a token and airdrop?

Like other powerful L2 projects, a token is only a matter of time. 🤔 By good old tradition, the team's statements that they won't have a token or airdrop in 90% of cases say the opposite, and we think Base is not an exception.

👀 On Dune, you can see the total number of deposits to Base Mainnet as of 5/13/2024 - about 581k.

💰 Cost of software

The cost of 1 account - from 3.5 USD

(for unlimited transactions)

When depositing from $1000, receive a bonus of up to +100%.

Cost of accounts with bonuses:

Deposit Amount	Price of account
Under $1,000	$7
$1000	$6.65
$2000	$6.3
$4000	$5.8
$6000	$5.3
$8000	$5
$10000	$4.6
$12000	$4.3
$14000	$4.1
$16000	$3.8
$18000	$3.6
$20000	$3.5

💡

How to pay your account guide 👇

A guide to adding wallets and paying for software in DegenSOFT.

⭐️ Download the software

You can download only from Dropbox.

❗️ Software is not given out in any bots (even ours, in case the bot is hacked)

🤖 Software for Base

The software performs activities in the following projects👇

▶️ Bridges

Transfer via Official Bridge from Ethereum to Base.
Bridge via Stargate from Optimism, Arbitrum, and Linea to Base (additional activity in LayerZero).
Bridge via Orbiter Finance from Arbitrum, Arbitrum Nova, Optimism, zkSync, Scrol, Linea, and Zora to Base.
Bridge via Nitro from Arbitrum, Optimism, zkSync, Scroll, Linea to Base.

▶️ Reverse Bridges

Transfer via Official Bridge from Base to Ethereum .
Bridge via Stargate from Base to Arbitrum, Linea, Optimism.
Bridge via Orbiter Finance from Base to Arbitrum, Arbitrum Nova, Optimism, zkSync, Scroll, Linea, Zora.
Bridge via Nitro from Base to Arbitrum, Optimism, zkSync, Scroll, Linea.

▶️ Swaps

Swaps in 9 projects on the Base network: Uniswap, PancakeSwap, SushiSwap, BaseSwap, Maverick, OdosSwap, 1inch, Aerodrome.

▶️ Reverse Swaps

Reverse swaps also occur via Uniswap, PancakeSwap, SushiSwap, BaseSwap, Maverick, OdosSwap, 1inch, Aerodrome.

▶️ Lending

Deposit ETH or USDbC to AAVE.
Liquidity withdrawal.

▶️ Dapps

Creating Safe.
Sending messages via L2Telegraph to opBNB, Polygon, Optimism, Arbitrum, Mantle, BSC, Zora.
Send emails via Dmail.
Deploy smart contracts.
NFT mint on NFTS2ME.

Additional software features

Ability to use encrypted private keys.

💡

Software for encrypting wallets

Encrypter - software for encrypting wallets

Ability to use mobile and regular proxies.
Ability to mix different modules or select one random module.
GWEI limitation for Ethereum and Scroll.
Ability to limit slippage.
Ability to change RPC in settings.
Ability to select minimum remaining balance for swaps.
Ability to select amounts in the percentage range of the balance.
Creation and use of configurations for software operation.
Ability to choose a path for saving configurations.
Detailed statistics about wallets in logs.
Project order randomization.
Amount randomization.
Wallet order randomization.
Randomization of tokens for swaps.

▶️ Bridges

💡

In this block, you can bridge ETH to the Base network via different bridges from different networks.

The following options are available for bridging ETH to the Base network 👇

Bridge via Official Bridge from Ethereum to Base.
Bridge via Stargate from Optimism, Arbitrum, Linea to Base (additional activity in LayerZero)
Bridge via Orbiter from Arbitrum, Arbitrum Nova, Optimism, zkSync, Scrol, Linea, Zora to Base.
Bridge via Nitro from Arbitrum, Optimism, zkSync, Scroll, Linea to Base.

Choose bridge amounts in ETH or as a percentage of your balance.

Specify the required bridge amount in the range from and to in the desired bridge.

▶️ Reverse Bridges

💡

In this block, it is possible to withdraw ETH from Base back to all networks available in the software using four different bridges.

The following options are available to bridge the ETH token from the Base network.

Trasfer via Official Bridge from Base to Ethereum .
Bridge via Stargate from Base to Arbitrum, Linea, Optimism .
Bridge via Orbiter Finance from Base to Arbitrum, Arbitrum NOVA, Optimism, zkSync, Scroll, Linea, Zora .
Bridge via Nitro from Base to Arbitrum, Optimism, zkSync, Scroll, Linea.

Choose bridge amounts in ETH or as a percentage of your balance.

Specify the required bridge amount in the range from and to in the desired bridge.

▶️ Swaps

💡

In this block, you can select projects to make swaps on the Base network through 9 different projects. The ETH token will be swapped to the selected tokens.

Swaps are available in the following projects: Uniswap, PancakeSwap, SushiSwap, BaseSwap, Maverick, OdosSwap, 1inch, Aerodrome

Selection of tokens and exchange amount

In this section, select the desired tokens and amounts for swaps in dollars or percentage of balance.

‣

Also select the minimum balance in the "Balance Limit" field that should remain on the balance after the swap in ETH tokens.

Selection of projects for swap

You can select all projects and enable the Random project function.

In this case, each wallet will have only one swap in one of the projects randomly. It is different for each wallet.

▶️ Reverse Swaps

💡

In this block, you can select projects to do reverse swap of different tokens into ETH.

Selection of tokens for swap

If the "All tokens" parameter is enabled, all tokens will be swapped back to ETH on each wallet. To swap not all tokens, but a part of them, you need to turn off this parameter and select below which tokens you want to swap back to ETH.

Selection of exchange amount

You can swap back either the entire balance of some token or just a part of it.

❗

Important! The "From" field specifies the amount to be used for the swap. For example, if you specify $5, then only tokens with more than $5 in the balance will be exchanged. Tokens with a balance less than $5 will not be swapped in this case.

To swap the entire balance, you need to enable Max.

To swap back some tokens, you need to enable Max and select the amount to be swapped back.

✅

Important! If an error occurs during reverse swap via one of the projects (due to insufficient liquidity or lack of tokens), the software will immediately attempt to swap the same token via another project.

▶️ Lending

💡

In this module you can deposit liquidity in the Aave project in ETH or USDbC token.

Choose a token for deposit

💡

If two tokens are selected, the software will choose one random token. If the selected token is not in the balance, the software will try to make a deposit of the second token. If neither of the tokens is present, the wallet will be skipped, and the software will move on to the next one.

Select the deposit amount in $ or % of balance

For the action, select deposit or withdrawal. You can select two actions at once. Then the withdrawal will be made after a pause from the "delay between projects".

▶️ Dapps

💡

In this module, we can warm up the wallet using different smart contracts and new types of activities.

➡️ Safe - create multisig wallet on Safe.

💰 Cost of creation- $0.03 with Base GWEI 0.03

➡️ L2Telegraph - Send messages via LayerZero to random or specific network on L2Telegraph.

💰 Cost of sending at Base GWEI 0.03:

to Zora - $0.31
to BSC - $1.4.
to Mantle - $1.57.
to Arbitrum - $0.77
to Optimism - $0.44.
to Polygon - $0.79.
to opBNB - $0.5.

➡️ Dmail - sending emails via Web3 email service Dmail.

💰 Cost to send is $0.01 at Base GWEI 0.03

➡️ NFTS2ME - mint any NFT on the NFTS2ME site.

About 20 free NFTs have already been added to the software for minting:

‣

List of added NFTs

➡️ Deploy Smartcontracts - software makes a smartcontract deploy like Hello World type!

💰 Deploy cost - $0.02 at Base GWEI 0.03

💡

In this case, a simple Solidity smart contract is deployed. Compilation of the contract takes place directly in the software. Each smart contract is unique and does not repeat the previous ones. This is solved by the fact that before creating the contract, the software generates a unique bytecode for this contract. The smart contract is deployed directly via RPC.

Bytecode is the machine language for the virtual machine. Bytecode can be compiled using high-level EVM languages.

▶️ Sequential or random start of modules

You can run the software in several modes:

Sequential ➡️

💡

If you select all modules at once, they will be executed in this order: Bridge→Swap→Liquidity→Dapps→Reverse Swap→Reverse Bridge

Random (Mix activity) 🔀

💡

In this case, all selected modules will be executed, but in random order on each wallet.

Random activity

💡

In this case, only one of all selected modules will be executed, different on each wallet.

▶️ Configs

💡

In the configuration, you can save the required parameters of the software for further work. You can create several configurations, load them into the software, and run them simultaneously.

Creating configurations

To create a configuration, you must first select the necessary parameters in the software to work with the projects you want. After that, it is necessary to specify the name of the configuration and select a folder for saving it.

❗

Important! Configurations are loaded into the software in alphabetical order, so for the correct order of loading configurations and their future execution, we recommend putting "1", "2", "3", etc. at the beginning of the name.

🔥 In the software folder you can find ready-made configurations for work with detailed description of work of each of them in txt file.

Configs uploading

To upload, click the Choose configuration button and select the configurations required for operation.

After uploading, check the Use choosed configurations checkbox. If you hover over a configuration, you will also be able to see its parameters.

Select the delay settings between configurations and the number of repetitions of each configuration.

💡

IMPORTANT! parameters such as delays between wallets, GWEI limitation and slippage are selected in Settings.

🔥 Ready-made Configs

Different optimal configurations for operation have already been created in the software folder. All that remains is to load them into the software and start working.

‣

👈 Detailed description of ready-made configurations:

▶️ Settings

In the settings, set the following options:

Shuffling wallets and activities
GWEI limitation for both networks
Slippage
Delays between wallets and projects

💡

Clearing cache. This function is recommended during software updates to prevent any files from conflicting with each other after the update.

❗

IMPORTANT! All other settings (proxy, RPC) are set on the Degensoft main screen.

DegenSoft - The Main Software

▶️ Logs

💡

Here you can see detailed information about the operation of the software.

Each action of the software will be described in logs.

Links to transactions are clickable and clicking on them will open a scanner with information about the transaction.

The following is also added:

Ability to save logs in a text file on the device.
Ability to clear the page with logs.
Button to hide and display the wallet address.

🚀 Instructions to start the software:

Pay for software and add wallets according to the guide 👇

A guide to adding wallets and paying for software in DegenSOFT.

Download the software from Dropbox.
Open DegenSOFT BOT and click on the API key button. We get the key to enter into the program.
Unzip the archive with the software in a convenient location for you and run the software file.
Import the file with private wallet keys.
Set the settings, data and projects required for operation. After that start the work.

FAQs

❓ How do I check if the software worked successfully?

You can check which transactions passed in https://debank.com/ or official scanner - https://basescan.org/.

❓From which IP address does the software perform actions?

The software implements the function of using a separate IP address for each wallet by means of proxy with the ability to change the IP. So for each wallet the IP address will be unique.

❓ Why closed source software?

The closed code is necessary to keep the program from going into the public channels, but there is a video demonstration of the software code, which is available by subscription.

❓ Can we see the private keys?

No, we do not see private keys. You download the program to your computer and your private data is not sent anywhere. Moreover, they are not even saved anywhere.

❓ Do we see wallet addresses?

Wallet addresses we do not see, as YOU in DegenSOFT BOT add Hash your wallets, which you encrypt in advance and in the future when working, the software will refer to the Hash.