Software for Linea

Navigation

Project Overview.
Why will there be a token and likely an airdrop?
Cost of software.
Download the software.
Running software on macOS.
Features.
Instructions for launching the software.
FAQ.

✅ Project Overview

Linea - another L2 to get airdrop 👀

ConsenSys is one of the oldest development teams in web3, who are behind the development of Infura and the well-known Metamask wallet. They are currently developing the Linea blockchain.

💰 Fundraising

ConsenSys has raised $715M from funds over time. Investors include: Electric Capital, Coinbase Ventures, DragonFly, Microsoft, ParaFi, MasterCard, Spartan, Animoca and other well-known funds.

🌐Social networks

Project’s twitter account has 507k followers. Among them: famous VCs, influencers, projects, etc.

🐦 Twitterscore - 72 🔥 - https://twitterscore.io/twitter/LineaBuild/overview.

Why will there be a token and likely an airdrop? 🪂

The situation here is similar to Scroll, for example. There is no doubt about the release of the token. Like other powerful L2 projects, the token is only a matter of time.

👀 At the moment, there are only about 380k addresses in the Linea network, and this can be considered “Early”. You can follow the statistics on Dune.

💰 Cost of software

The cost of 1 account - from 5 USD

(for unlimited transactions)

When depositing from $1000, receive a bonus of up to +100%.

Cost of accounts with bonuses:

Deposit Amount	Price of account
Under $1,000.	$10
$1000	$9.5
$2000	$9
$4000	$8.29
$6000	$7.57
$8000	$7.14
$10,000	$6.57
$12,000	$6.14
$14,000	$5.86
$16,000	$5.43
$18,000	$5.14
$20,000	$5 🔥

💡

How to pay your account guide 👇

A guide to adding wallets and paying for software in DegenSOFT.

⭐️ Download the software

You can download only from Dropbox.

❗

Software is not given out in any bots (even ours, in case the bot is hacked)

🤖 Features

Software performs activities in the following projects 👇

▶️ Bridges

Bridge via official bridge from Ethereum to Linea.
Bridge via Orbiter Finance from zkSync Era to Linea.
Bridge via Orbiter Finance from Arbitrum One to Linea.
Bridge via Orbiter Finance from Arbitrum Nova to Linea.

▶️ Reverse Bridges

Bridge via Orbiter Finance from Linea to zkSync Era.
Bridge via Orbiter Finance from Linea to Arbitrum One.
Bridge via Orbiter Finance from Linea to Arbitrum Nova.

💡

Official reverse bridge has not been added yet due to the fact that tokens after bridge need to be claimed manually on each wallet. Autoclaim does not work in the official bridge at the moment. As soon as this feature is added, the official bridge will be added to the software.

▶️ Swaps

Swaps on SyncSwap.
Swaps on iZUMi.
Swaps on HorizonDEX.
Swaps on EchoDEX.

▶️ Reverse Swaps

Reverse swaps also occur on EchoDEX, HorizonDEX, iZUMi, and SyncSwap.

▶️ Liquidity

Ability to add liquidity to the USDC/ETH pool on SyncSwap.

▶️ Dapps

Sending emails via Dmail.
Buying NFTs on Element Market.
Smart contracts deployment.

Additional software features

Ability to use encrypted wallets.

💡

Software for encrypting wallets

Encrypter - software for encrypting wallets

GWEI limitation on Ethereum and Linea.
Ability to limit slippage.
Ability to change RPC in settings.
Ability to select the minimum remaining balance at swaps.
Ability to select amounts in the percentage range of the balance.
Creating and using configurations for software operation.
Ability to choose a path for saving configurations.
Detailed statistics of wallet work in logs.
Project order randomization.
Amount randomization.
Wallet order randomization.
Randomization of tokens for swaps.

▶️ Bridges

💡

In this block, you can bridge an ETH from the Ethereum, Arbitrum, and zkSync Era.

There are three options available to bridge the ETH 👇

Bridge via official bridge from Ethereum to the Linea network.
Bridge over Orbiter from zkSync Era to the Linea network.
Bridge via Orbiter from Arbitrum to the Linea network.

Choose bridge amounts in ETH or as a percentage of your balance.

❗

The minimum amount to bridge via Orbiter is $10.

The required bridge amount is specified in the range from and to in the desired bridge.

▶️ Reverse Bridges

💡

In this block, you can withdraw tokens from Linea back to the Arbitrum or zkSync Era.

Two options are available to bridge the ETH from the Linea 👇

Bridge via Orbiter from Linea to the zkSync Era network.
Bridge via Orbiter from Linea to the Arbitrum network.

💡

The official reverse bridge has not been added yet due to the fact that tokens after the bridge need to be claimed manually on each wallet. Autoclaim does not work in the official bridge at the moment. As soon as this feature is added, the official bridge will be included in the software.

Choose bridge amounts in ETH or as a percentage of your balance.

❗

The minimum amount to bridge via Orbiter is $10.

The required bridge amount is specified in the range from and to in the desired bridge.

▶️ Swaps

💡

In this block, you can select projects to make swaps on the Linea network. The ETH token will be swapped for the selected tokens.

Swaps are available in the following projects 👇

Swaps in SyncSwap.
Swaps in iZiSwap.
Swaps in HorizonDEX.
Swaps in EchoDEX.

Selection of tokens for swap

Tokens for swap are selected using the Token Settings section.

Clicking this button will open a window with token selection for each project. Tokens can be selected from the drop-down list.

❗

IMPORTANT! Not all DEXes currently have great liquidity for different tokens. You can select all tokens for all projects, but some of them may not be swapped due to insufficient liquidity at the moment.

A blue "Default" button has been added for such situations. When you click on it, the recommended tokens for swapping in each project will be automatically set based on the available liquidity of these tokens.

Choosing swap amount

Select in what you want to specify the swap amounts (in USD or percentage of balance).

Also select the minimum balance that should remain on the balance after ETH tokens swap.

💡

This function allows you to select the amount of $USD that must necessarily remain in your balance during swaps.

This allows you to always leave a certain minimum amount in your balance, so that you always have enough ETH to pay the reverse swap fee.

💡

Example. If a balance of $12 and a range of $9-15 is set at $0.5, the range of $9-11.5 will be selected for the swap.

Select the desired projects and specify the required swap parameters for each project.

You can select all projects and enable the Random project function.

In this case, each wallet will have only one swap in one of the projects randomly. It is different for each wallet.

▶️ Reverse Swaps

💡

In this block you can select projects to do reverse swap of different tokens into ETH token.

Selection of tokens for reverse swap

If the "All tokens" parameter is enabled, all tokens in each wallet will be swapped back to ETH. To swap only a portion of the tokens, you need to disable this parameter and select below which tokens you want to swap back to ETH.

Choosing swap amount

You can swap back the entire balance of a token or just a part of it.

To swap back the entire balance, you need to enable Max.

To swap back a part of tokens, you need to disable Max and select the method of swap amount (as a percentage of balance or in USD) in the drop-down list.

Select the projects to be reverse swapped. If Max balance swap is enabled, you cannot edit the values in the Min and Max fields.

💡

IMPORTANT! If an error occurs during the reverse swap through one of the projects (due to insufficient liquidity or lack of tokens), the software will immediately attempt to swap the same token via another project.

▶️ Liquidity

💡

In this block you can add or withdraw liquidity in the USDC/ETH pair on SyncSwap.

If you select two projects at once, first a liquidity deposit will be made. After that, there will be a pause set in the settings before a withdrawal is made.

It is possible to choose the deposit amount both in dollars ($) and as a percentage (%) of the balance.

💡

If liquidity has already been added from the wallet, new liquidity will no longer be added, and the wallet will be skipped.

▶️ Dapps

💡

In this block, you can warm up your wallet by using various smart contracts and engaging in new types of activities.

➡️ Dmail - send emails via web3 mail service Dmail.

💰 Transaction cost - $0.1 at 20 GWEI

➡️ Deploy Smartcontracts - software makes a deploy of a smart contract like Hello World!

💰 Transaction cost - $0.68 at 20 GWEI

💡

In this case, a simple Solidity smart contract is deployed. Compilation of the contract takes place directly in the software.

Each smart contract is unique and does not repeat the previous ones. This is solved by the fact that before creating the contract, the software generates a unique bytecode for this contract.

The smart contract is deployed directly via RPC.

Bytecode is the machine language for the virtual machine. Bytecode can be compiled using high-level EVM languages.

➡️ Buy NFT on Element Market - a feature to buy a random NFT collection within a specified price range.

💰 Transaction cost - $0.1 at 20 GWEI

▶️ Configurations

💡

In the configuration, you can save the required parameters of the software for further work. You can create several configurations, load them into the software, and run them simultaneously.

Configuration creation

To create a configuration, you must first select the necessary parameters in the software to work with the projects you want. After that, it is necessary to specify the name of the configuration and select a folder for saving it.

❗

IMPORTANT! Configurations are loaded into the software in alphabetical order, so for correct order of loading configurations and their future execution we recommend to put "1", "2", "3", etc. in the beginning of the name.

🔥 In the software folder, you can find ready-made configs with detailed descriptions of how each of them works in a txt file.

Configuration uploading

To upload, click the Choose configuration button and select the configurations.

After uploading, check the Use choosed configurations checkbox. By pointing to a configuration you can also see its parameters.

Select the settings for the delay between configurations and the number of repetitions of each configuration.

💡

IMPORTANT! Parameters such as delays between wallets, GWEI limitation and slippage are selected in Settings.

▶️ Software Settings

Specify the API key, received from the bot.

Upload the file with wallets and provide a password if it’s need to decrypt.

💡

Software for encrypting wallets

Encrypter - software for encrypting wallets

Specify limits for GWEI and maximum slippage for swaps.

RPCs cannot be edited at this time, as the most stable RPCs have been added to the software.

Specify delay range between wallets.

▶️ Logs

💡

Here you can see detailed information about the operation of the software.

Each action of the software will be described in logs.

Links to transactions are clickable and clicking on them will open a scanner with information about the transaction.

🚀 Instructions for launching the software

Pay for the software and add wallets according to the guide 👇 A guide to adding wallets and paying for software in DegenSOFT.
Download the software from Dropbox.
Open DegenSOFT BOT and click on the API key button. Get the key to enter into the program.
Unzip the archive with the software to a convenient place for you and run the software file.
Import the file with private wallet keys.
Set the settings, data and projects required for work. After that start the work.

❓ FAQ

❓ How do I check that the software has worked successfully?

You can check which transactions are successful in https://debank.com or the official scanner: https://lineascan.build.

❓ From which IP-address the software performs actions?

The software implements the function of using a separate IP address for each wallet using a proxy with the ability to change IP. Therefore, the IP address for each wallet will be unique.

❓ Why is software closed source?

Closed code is necessary to keep the program from going public, but there is a video with demonstration of the software code.

❓ Do we see the private keys?

No, we do not see private keys. You download the program to your computer and your private data are not sent anywhere. Moreover, they are not even saved anywhere.

❓ Do we see wallet addresses?

We don't see wallet addresses, because YOU add Hash of your wallets to DegenSOFT BOT, which you will hash beforehand and in future when working, the software will refer to Hash.