Software for Scroll

ℹ️ Navigation

Project Overview
Will there be a token and airdrop?
Cost of software
Download the software
Features
Instructions for launching the software.
FAQ.

✅ Project Overview

Scroll is a Layer 2 blockchain that is based on zk-Rollup technology. Its main component is zkEVM, and its main technical advantages are:

Scalability. Scroll processes transactions outside the core network and provides concise proofs of trust on the Ethereum network. This results in significantly higher throughput and lower costs compared to the Ethereum network.
Compatibility with EVM. Creating applications on Scroll is similar to developing for Ethereum. Any smart contract written in Solidity or Vyper for the EVM can be easily deployed on the Scroll network.
Community Vision. From the beginning, the development of Scroll has been in close interaction with the Ethereum community. This approach brings together the best ideas and suggestions from stakeholders, ultimately resulting in a more secure and thoughtful architecture. Scroll's development roadmap is also shaped together with community members.
Security. Scroll uses zero-knowledge proof technology (zk-Proof), ensuring a high level of security and reliability.

Development history and investments

Scroll was founded in 2021. Later, they raised about $3M from business angels.

In April 2022, they closed a Series A funding round of $30M with Polychain Capital as the lead investor and the participation of Bain Capital Crypto, Robot Ventures, and other investors.

Then, the project has been actively growing and already in March 2023: Scroll raised $50M from Polychain Capital, Sequoia China, Bain Capital Crypto, Moore Capital Management, Variant Fund, Newman Capital, Qiming Venture Partners, and others. At a project valuation of $1.8B!

October 17, 2023: Scroll officially announced the launch of the mainnet. Since then, according to L2Beat, the total TVL is already $38.8M, and many projects from the Ethereum L2 ecosystem have already launched on the Scroll Mainnet.

‣

Scroll Official Links

🤔 Will there be a token and airdrop?

If you look at the history of project development and analyze the investments, you can conclude that the project is developing in close cooperation with the Ethereum team. The project is also followed by a16z, Sequoia Capital, Polychain, OKX Ventures, Paradigm, and many others. This is a pretty significant green flag.

There is no tokenomics or any information about airdrop plans in Discord or on official project resources yet. However, with so many green flags, as well as impressive funding, our team assumes that early adopters who actively use the network and interact with the Scroll ecosystem can expect a retrospective airdrop.

💰 Cost of software

The cost of 1 wallet - from 3.5 USD

(for unlimited transactions)

When depositing from $1000, receive a bonus of up to +100%.

Cost of accounts with bonuses:

Deposit Amount	Price of account
Under $1,000.	$7
$1000	$6.3
$2000	$5.8
$3000	$5.3
$4000	$5
$5000	$4.6
$6000	$4.3
$7000	$4.1
$8000	$3.8
$9000	$3.6
$10000	$3.5

💡

How to pay your account guide 👇

A guide to adding wallets and paying for software in DegenSOFT.

⭐️ Download the software

You can download only from Dropbox.

❗

Software is not given out in any bots (even ours, in case the bot is hacked)

🤖 Features

Software performs activities in the following projects 👇

▶️ Bridges

Bridge via official bridge from Ethereum to Scroll.
Bridge via Orbiter Finance from Arbitrum to Scroll.
Bridge via Orbiter Finance from Optimism to Scroll.
Bridge via Orbiter Finance from zkSync to Scroll.
Bridge via Orbiter Finance from Base to Scroll.
Bridge via Orbiter Finance from Linea to Scroll.

▶️ Reverse Bridges

Bridge via official bridge from Scroll to Ethereum.
Bridge via Orbiter Finance from Scroll to zkSync.
Bridge via Orbiter Finance from Scroll to Arbitrum.
Bridge via Orbiter Finance from Scroll to Base.
Bridge via Orbiter Finance from Scroll to Optimism.
Bridge via Orbiter Finance from Scroll to Linea.

▶️ Swaps

Swaps on SyncSwap.
Swaps on iZUMi.
Swaps on Zebra.

▶️ Reverse Swaps

Reverse swaps also occur on Zebra, iZUMi, and SyncSwap.

▶️ Dapps

Sending emails via Dmail.
Smart Contract deployment.
Creating an NFT on Omnisea.

Additional software features

Ability to use encrypted wallets.

💡

Software for encrypting wallets

Encrypter - software for encrypting wallets

GWEI limitation.
Ability to limit slippage.
Ability to change RPC in the settings.
Ability to select the minimum remaining balance at swaps.
Ability to select amounts in the percentage range of the balance.
Creating and using configurations for software operation.
Ability to choose a path for saving configurations.
Detailed statistics of wallet work in logs.
Project order randomization.
Amount randomization.
Wallet order randomization.
Randomization of tokens for swaps.

▶️ Bridges

💡

In this block, you can bridge an ETH from the Ethereum, Arbitrum, Optimism, zkSync, Base and Linea.

The following options are available to bridge an ETH token to the Scroll network 👇

Bridge via official bridge from Ethereum to Scroll.
Bridge via Orbiter Finance from Arbitrum to Scroll.
Bridge via Orbiter Finance from Optimism to Scroll.
Bridge via Orbiter Finance from zkSync to Scroll.
Bridge via Orbiter Finance from Base to Scroll.
Bridge via Orbiter Finance from Linea to Scroll.

Choose bridge amounts in ETH or as a percentage of your balance.

Specify the required bridge amount within the desired range from and to.

▶️ Reverse Bridges

💡

In this block, you can withdraw tokens from Scroll back to the Ethereum, Arbitrum, Optimism, zkSync, Base and Linea.

The following options are available to bridge an ETH token from the Scroll network 👇

Bridge via official bridge from Scroll to Ethereum.
Bridge via Orbiter Finance from Scroll to zkSync.
Bridge via Orbiter Finance from Scroll to Arbitrum.
Bridge via Orbiter Finance from Scroll to Base.
Bridge via Orbiter Finance from Scroll to Optimism.
Bridge via Orbiter Finance from Scroll to Linea.

Choose bridge amounts in ETH or as a percentage of your balance.

Specify the required bridge amount within the desired range from and to.

▶️ Swaps

💡

In this block, you can select projects to make swaps on the Scroll. The ETH token will be swapped for the selected tokens.

Swaps are available in the following projects 👇

Swaps on SyncSwap.
Swaps on iZUMi.
Swaps on Zebra.

Selection of tokens and swap amount

In this section, select the desired tokens and amounts to swap in USD or a percentage of balance.

‣

Also, select the minimum remaining balance in the "Balance Limit" field that should remain on the balance after the swap in ETH tokens.

Selecting projects for the swap

You can select all projects and enable the Random project function.

In this case, each wallet will have only one swap in one of the projects randomly. It is different for each wallet.

▶️ Reverse Swaps

💡

In this block you can select projects to reverse swap of different tokens into ETH token.

Selection of tokens for reverse swap

If the All tokens parameter is enabled, each wallet will swap all tokens back to ETH. To swap only a portion of the tokens instead of all of them, you need to disable this parameter and select below which tokens you want to swap back to ETH.

Selection the amount to swap

You can swap back either the entire balance of a token or just a part of it.

To swap the entire balance, you need to enable Max.

To swap back a part of tokens, you need to disable Max and select the amount for reverse swap.

✅

IMPORTANT! If an error occurs during the reverse swap via one of the projects (due to insufficient liquidity or lack of tokens), the software will immediately attempt to swap the same token via another project.

▶️ DApps

💡

In this block, you can warm up your wallet by using different smart contracts and engaging in new types of activities.

➡️ Dmail - sending emails via Web3 mail service Dmail.

💰 Transaction cost - $0.44 with GWEI 20

➡️ Omnisea - creating an NFT collection on Omnisea.

💰 Transaction cost - $0.7 at GWEI 20

➡️ Deploy Smart Contracts - software deploys a smart contract like Hello World!

💰 Transaction cost - $0.95 at GWEI 20

💡

In this case, a simple Solidity smart contract is deployed. Compilation of the contract takes place directly in the software.

Each smart contract is unique and does not repeat the previous ones. This is solved by the fact that before creating the contract, the software generates a unique bytecode for this contract.

The smart contract is deployed directly via RPC.

Bytecode is the machine language for the virtual machine. Bytecode can be compiled using high-level EVM languages.

▶️ Configurations

💡

In the configuration, you can save the required parameters of the software for further work. You can create several configurations, load them into the software, and run them simultaneously.

Configuration creation

To create a configuration, you must first select the necessary parameters in the software to work with the projects you want. After that, it is necessary to specify the name of the configuration and select a folder for saving it.

❗

IMPORTANT! Configurations are loaded into the software in alphabetical order, so for correct order of loading configurations and their future execution we recommend to put "1", "2", "3", etc. in the beginning of the name.

🔥 In the software folder, you can find ready-made configs with detailed descriptions of how each of them works in a txt file.

Configuration uploading

To upload, click the Choose configuration button and select the configurations.

After uploading, check the Use choosed configurations checkbox. By pointing to a configuration you can also see its parameters.

Select the settings for the delay between configurations and the number of repetitions of each configuration.

💡

IMPORTANT! Parameters such as delays between wallets, GWEI limitation and slippage are selected in Settings.

🔥 Ready-Made Configs

Different optimal configurations have already been created in the software folder. All that remains is to load them into the software and run them.

‣

👈 Detailed description of ready-made configurations:

▶️ Settings

The following settings for the software are set in the settings:

GWEI limitation.
Slippage.
Delays between wallets and projects.

💡

Clear cache. This function is recommended during software updates to prevent any files from conflicting with each other after the update.

▶️ Logs

💡

Here you can see detailed information about the operation of the software.

Each action of the software will be described in logs.

Links to transactions are clickable, and clicking on them will open a scanner with information about the transaction.

The following is also added:

Ability to save logs in a text file on the device.
Ability to clear the page with logs.
Button to hide and display the wallet address.

🚀 Instructions for launching the software

Pay for the software and add wallets according to the guide 👇 A guide to adding wallets and paying for software in DegenSOFT.
Download the software from Dropbox.
Open DegenSOFT BOT and click on the API key button. Get the key to enter into the program.
Unzip the archive with the software to a convenient place for you and run the software file.
Import the file with private wallet keys.
Set the settings, data and projects required for work. After that start the work.

❓ FAQ

❓ How do I check that the software has worked successfully?

You can check which transactions are successful in https://debank.com or the official scanner: https://scrollscan.com/.

❓ From which IP-address the software performs actions?

The software implements the function of using a separate IP address for each wallet using a proxy with the ability to change IP. Therefore, the IP address for each wallet will be unique.

❓ Why is software closed source?

Closed code is necessary to keep the program from going public, but there is a video with demonstration of the software code.

❓ Do we see the private keys?

No, we do not see private keys. You download the program to your computer and your private data are not sent anywhere. Moreover, they are not even saved anywhere.

❓ Do we see wallet addresses?

We don't see wallet addresses, because YOU add Hash of your wallets to DegenSOFT BOT, which you will hash beforehand and in future when working, the software will refer to Hash.

🎬 Video of the software code demonstration - Embed Dropbox